Livewell Pump Timer configurable via phone

Installs easily. Same as bilge pump and float switch. I didn't use the optional wires. IGNORE THE ORANGE WIRE. I was concerned about the set up but worked well. I was also concerned about mounting where I couldn't see the LED light blinking during set up but it really isn't necessary. Set up mode activates as soon as you make the white wire contact with ground. You only need to see the LED if maybe you are trouble shooting. Any problems, contact SLAVA at Timers.Shop. He was VERY helpful. I mounted it remotely, near a ground so I can reach it with the white wire if I want to change the set up. You might prefer to use a momentary switch to connect the white wire to ground for set up. I didn't because I didn't want another switch in the way that I wasn't going to use hardly at all.

Easy to wire if you follow the schematic drawing(s) provided. I found the iPhone to be the easiest way to set up the configuration. Easy to change the settings right in the boat. I set mine up to run 30 seconds at full speed (100% duty cycle), 3 minutes off, 30 seconds full speed, 3 minutes off, etc. Keeps fish alive all day.

This is the most full featured and easy to use livewell timer I have found. Not even factory livewell systems have timers this capable and simple to use. It puts them all to shame. I would highly recommend this timer to anyone wanting to program the run time of any 6 to 18 volt dc pump. And it will do it up to 10 amps current. Amazing. Thanks for a great product.