- Download the firmware zip and uncompress UI and Firmware files.
- Put the timer into the configuration mode. Connect to the timer's Wi-Fi, and go to the timer's Administration page. In the browser, type the address: 192.168.4.1/rota and click go. Ensure you enter the address into the address bar, not a search bar like Google. After the unit restarts, it will be in firmware update mode. Reconnect to Wi-Fi again and go to the timer's Administration page. Click Update Firmware. Select the downloaded Firmware file and click upload. Once updated, click back to return to the timer Administration page and click Restart.
- This step is only required for UI update. To update the UI, put the timer into Wi-Fi configuration mode. Go to the address 192.168.4.1/update. Select the downloaded UI file and upload it. Wait until units reboot and the Wi-Fi network is available (10- 20 secs). The update is complete.
June 08, 2025 - Version V1.0.6. Added additional operation modes. Positive or Ground trigger control selection.
Comments: Update both Firmware and UI.
